1. reflective coating infrared lamp
Characteristics: Energy-saving and efficient, coated lamp and uncoated lamp 5 centimeters higher than the detection temperature of more than 30%, that is, about 30% energy savings. According to the calculation of 1000W lamp life of 5000 hours, each lamp with coated heating lamp can save 1500 degrees of electricity during its life, which is equivalent to saving 1200 yuan. (at 0.8 yuan per kilowatt hour)
Ideal Heat Distribution: Coated heating lamps have a reflective layer on one side of the lamp tube, which makes the heat energy more concentrated on the object that needs to be heated.
Heater protection: due to reflective coating, the temperature of the coating side of the lamp tube is significantly reduced, which can reduce the unfavorable baking of the equipment, simplify the structure of the equipment, and prolong the service life of the equipment and heater.
More rapid heat transfer: Short-wave infrared heating is a very energy-efficient way of heating objects directly without heating the air between the lamp and the object being heated. And the reflector coated tube makes the thermal radiation more concentrated, and the heating of the heated object will be more rapid.
2. semi white infrared lamp
The utilization ratio of heat efficiency of white-coated infrared heating tube is 86%, and the rated power can reach about 50% in 1-2 seconds after power-on.
After about 2-4 seconds, it can run in full power, and the temperature drops rapidly. The precious metals such as gold and titanium or zirconium can be sprayed locally.
The directional reflective layer of aluminium and other oxides can greatly improve the heating efficiency by means of temperature controller, thyristor AC power regulator, voltage regulator, etc.
